Ships the same day if ordered before 4.30pm Mon-Fri
Couldn't load pickup availability
The PITATA UTP-Time Hacker is a dream device. You can use it to predict any time that the audience will say at will.
What really matters is that the clock can be given to the audience as a souvenir at the end.
We put great thought and even more effort into this promotional trailer you will see next, but in the end, in order to protect the secret of the magic, we choose to conceal the gimmick in the trailer and other important details.
PITATA Time Hacker is a dream device for all magicians. You can use it to predict the time that the audience will say at will.
Very suitable for all kinds of large stages or parlour shows. Can also be used for close-up performances. (David Penn used it during a table-side performance. It can be used for important dinners and appointments. See below for the actual performance.)
You can perform this effect with almost any wall clock and give the clock away to the audience immediately after the effect. This alone is a miracle.
Yes. Almost any wall clock will work
You can put any time in the clock in an average time of just 6 seconds. The gimmick can be controlled from our remote control unit, from an Android or iOS App.
The main unit has Bluetooth + 2.4G dual-mode, which can be connected to the mobile app and the remote control at the same time. If one of them is disconnected or fails, the other can be used as a backup to deal with unexpected situations.
The signal link for UTP Time Hacker is very stable between the device and the gimmick. For tech-based magic products, signal stability is of the utmost importance. PITATA also promises long-term after-sale service. Defects in quality will only be replaced and not repaired.
• The longest time the clock hands need to travel is to 11:59 (i.e. the hands need to spin a full circle), it can be completed in about 25 seconds. (It cannot rotate in the opposite direction. This is the nature of the design.)
n the PITATA version, in addition to being incredibly easy to use and convenient - the clock can also be given away to the audience.
About the selection of the clock:
You can purchase the wall clock at IKEA for just $2-3, and swap out the movement with our provided moments. This will be compatible with the UTP-Time Hacker.
You can also use the custom clock movements provided and replace the clock movement on non-compatible wall clocks.
PITATA will provide clock movements will also be provided as a long-term service if it is inconvenient for customers to obtain them where you are located at the cost price. You can check the accessories page if you need.
1. Possibly the highest level of workmanship in the industry. The main body and remote control are all made from open-molding injection molding, with excellent feel and structural strength.
2. The new, removable battery design solves the lifespan issues of most electronic magic props once and for all.
3. The well-thought-out remote control design conforms to the magician's usage logic. Its shape and arrangement have been tested and modified, allowing you to operate it fairly quickly and precisely, even when pressing sightlessly in your pocket. In a magic performance, we want the product to adapt to you and not the other way around.
4. Multi-vibration feedback system designed from the perspective of a magician - every step you press, including input, cancel, send, accept success, complete rotation, and even accidental disconnection and reconnection, there are corresponding vibration prompts that allow you to fully grasp and avoid any surprises that may arise during your performance.
5. Built-in, long-distance 2.4G remote control. Despite the global chip shortage, we still managed to obtain the Bluetooth 4.0 chips, which ensures a reliable connection between the main body and the cell phone.
6. PITATA APP. In addition to the convenience of controlling a single clock to the next level, we have also built a brand new ecosystem with infinite possibilities: PITATA IoT system.
This means that from start to finish, the performer does not have to do anything, the effect takes care of itself. We have also designed several products in our lineup that can be added to this ecosystem.
Other Information:
The main body uses the most common 18650 lithium battery, which can last for more than 10 hours on a single full charge.
The remote control uses a 302025 lithium battery, which can be used for more than 5 hours on a single full charge.
Sound: Move to the bottom to see the test part. Size:
Main unit: 7.5*8.4*4.7 cm outside the main unit at its widest. Remote Control: 6*3.5*1.2cm. Weight: Main unit: 125 g. Pen 20 g.
Battery life: Main Unit: 10 hours. Remote Control: 5 hours
Signal connection distance: > 10m.
INCLUDES：
PITATA Time Hacker
Full Online Instructions
One Year Warranty.
One IKEA Wall Clock.
10× Customised Clock Movements (works with most other wall clocks.)
This is a great set of envelopes to use as switches, etc as there are the usual wallets around which can do the same. but to do bank night with more options really does need 2 more envelopes.The 2 envelopes are fine for switching and mentalism... For a pro version the envelopes are strong etc. So you will not tear these. These should last a long time. I have to agree the video instruction to open the envelope correctly should be a little more involved.. but none the less you cannot fault the rest of the video tutorial. Thanks Alex for your fast delivery, your the top man.
Really the best way to product a glass and not worry about smashing it
I wanted a realistic looking glass without carrying actual glass to gigs in case of breakages and these glasses are simply brilliant. Will be used both with RD360 and other productions.
This is the best flash string I've used but you have to be careful as it really does produce a lovely but strong burn. I found 24 hours drying minimum was good.
Firstly the bulb is absolutely stunning. Totally clear and does look and feel like a proper LED lightbulb. It is though lacking two main things. Firstly, a way to trigger with a delay or perhaps an underarm switch. There is no way you could put the remote in a shoe and not walk without a limp. At least with a delay you could trigger, hand the bulb to someone and know that within 5/10 seconds it will turn on without needing your hand in your pocket. Secondly it is lovely and bright but does seem just slightly suss that a bulb without any electricity can turn cleanly on just like a light switch would do. You would of thought some kind of flicker would be nice. This means it could then be used for a séance routine when "ghosts" are present or even when you are close to a spectators chosen object/card but not over it so the bulb flickers and then goes completely on when over the object. I did contact MS Magic when Shine 2.0 came out with these requests but obviously not included in 3.0. So hoping that 4.0 one day might address these nice-to-have features.
Great product performed last night. great fun reactions. I liked the little easil idea so from my local WORKS shop purchase four two small and two large for future jumbo card effects. Mathews Ideas using his story line meathod always work well under perfoming enviroments. I performed in a parlor setting but can easily be performed in a walk arroud.
Thanks to Alex of Monster Magic speedy dispatch the weeks practice paid off well
